Yaesu FTM-100DR Operating Manual page 159

6
Unplug the speaker cable from the socket on the
main board to completely remove the top cover from
the transceiver.
Caution
When unplugging the speaker cable, do not pull the
cable. Be sure to hold the connector part.
7
Refer to the illustration on the right and carefully plug
the FVS-2 into the connector.
Caution Check the direction of the connector and press the
FVS-2 all the way into the connector.
8
Reconnect the speaker cable plug extending between from the top cover to the
socket on the main board.
9
Attach the covers using the 8 screws.
Recording and listening to received audio
Connector
for FVS-2
159