Notification Of Incoming Calls From Partner Stations Using The Bell Function - Yaesu FTM-100DR Operating Manual

Notification of incoming calls from partner stations using the bell
function
While communicating using the tone squelch, DCS, or new pager function, a beep may
be programmed to sound when a signal containing the corresponding code is received.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [8 BELL RINGER], then
press .
4
Rotate the DIAL to select the desired number of
successive bell rings.
"1 OFF", "2 1 time", "3 3 times", "4 5 times", "5 8
times", "6 CONTINUOUS"
Tip The default setting: 1 OFF
5
Press and hold
Sets the selected beep setting and returns the display to the previously viewed
screen.
Tip You can also return to the previous screen by pressing
for over one second.
for over one second.
Communicating with specific stations
3 times.
89