Descaling; Auto-Off - DèLonghi ESAM6600 Instructions For Use Manual

Saving, adjust time, auto-start, auto-off, Coffee temperature, Water
hardness, Water filter, Beep, Statistics, default values.

Descaling

For instructions on descaling, see page 21.
Setting the language
To modify the language on the display, proceed as follows:
1. Press the P button to enter the programming menu;
2. Press the or button (corresponding to the
and symbol on the display) until "Set language" is
displayed;
3. Press the OK button;
4. Press the or button until (corresponding to
the and symbol on the display) the required
language is displayed;
5. Press the OK button to confirm;
6. Press the P button to exit the menu.
Energy Saving
use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in
compliance with european regulations.
1. Press the P button to enter the programming menu;
2. Press the or button (corresponding to the
and symbol on the display) until "energy
saving" is displayed;
3. Press the OK button. "disable?" is displayed, or "enable?" if
the function has already been disabled.
4. Press the OK button to disable or enable the function or P
to exit the menu.
When the function is enabled, if the appliance is not used for
about 1 minute, "energy Saving" is displayed.
Please note!
• A few seconds may elapse between " energy saving" mode
and delivery of the first drink. This is indicated by the rapid
increase then decrease of the progress bar and display of
the message "Preparation underway".
• When " energy saving" is disabled, the appliance turns the
cup warmer on automatically.
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the P button to enter the programming menu;
2. Press the or
and symbol on the display) until "adjust
time" is displayed;
3. Press the OK button: the hours flash on the display;
4. Press the or
and symbol on the display) until to change
button (corresponding to the
button (corresponding to the
the hours;
5. Press the OK button to confirm. The minutes flash on the
display;
6. Press the or
and symbol on the display) to change the
minutes;
7. Press the OK button to confirm;
8. Press the P button to exit the programming menu.
Auto-start
you can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must be set correctly.
1. Press the P button to enter the programming menu;
2. Press the or
and symbol on the display) until "auto-start
disabled" is displayed;
3. press the OK button. " enable?" is displayed;
4. Press the or
and symbol on the display) to choose the
hours;
5. Press the OK button to confirm. The minutes flash on the
display;
6. Press the or
and symbol on the display) to change the
minutes;
7. Press the OK button to confirm. "auto-start enabled" is
displayed.
8. Press the P button to exit the menu. The
appears next to the clock to indicate that auto-start has
been programmed.
To disable the function:
1. Press the P button to enter the programming menu;
2. Press the or
and symbol on the display) until "auto-start
enabled" is displayed;
3. Press the OK button. "disable?" is displayed;
4. Press the OK button to confirm;
5. Press the P button to exit the menu. The
longer displayed.
Auto-off (Stand by)
auto-off can be changed so that the appliance goes off after 15
or 30 minutes, or after 1, 2 or 3 hours.
1. Press the P button to enter the programming menu;
2. Press the or
and symbol on the display) until "auto-off"
11
button (corresponding to the
button (corresponding to the
button (corresponding to the
button (corresponding to the
symbol
button (corresponding to the
symbol is no
button (corresponding to the
Cloc
aut
Bee