Clock - Time; Setting The Time; Selecting 12/24-Hour Clock Mode; Having The Time Displayed Constantly When The Device Is Switched Off - Blaupunkt Hamburg CD70 Operating Instructions Manual

TIME

CLOCK - Time

Setting the time

The clock time can be automatically set by
means of the RDS signal. If you cannot re-
ceive an RDS station, or if the RDS station to
which you are listening does not support this
function, it is also possible to set the time
manually.
Having the time set automatically
In order to have the time set automati-
cally, press the MENU button, 8.
Press the or
as is necessary for "CLK MAN" (manu-
al) to appear in the display.
If "CLK AUTO" is displayed, automatic time
setting is already active.
button, 7, as often as is
Press the
necessary for "CLK AUTO" to appear in
the display.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
If "CLK AUTO" has been selected and a sta-
tion with the RDS time function (RDS-CT) is
received, the clock is automatically adjusted.
Setting the time manually
In order to adjust the time, press the
MENU button, 8.
Press the or
as is necessary for "CLOCKSET" to ap-
pear in the display.
Press the or
The time is shown on the display. The hours
blink and can be adjusted.
Adjust the hours with the
7.
When the hours have been set, press
button, 7.
the
The minutes blink.
24
button, 7, as often
button, 7, as often
button, 7.
/ button,
Adjust the minutes with the
ton, 7.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.

Selecting 12/24-hour clock mode

Press the MENU button, 8.
Press the or
as is necessary for "24 H MODE" or "12
H MODE" to appear in the display.
Press the or
between the modes.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Having the time displayed
constantly when the device is
switched off
If you want the time to be displayed
when the device is switched of and the
ignition is switched on, press the MENU
button 8.
Press the or
as is necessary for "CLK OFF" or "CLK
ON" to appear in the display.
Press the or
between the display being ON or OFF.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
/ but-
button, 7, as often
buttons, 7, to switch
button, 7, as often
button, 7, to switch