Tone And Volume; Adjusting The Bass; Adjusting The Treble - Blaupunkt Hamburg CD70 Operating Instructions Manual

Tone and volume

Note:
You can make separate adjustments to the
bass, treble and loudness for each audio
source.

Adjusting the bass

Press the AUD button, 9.
"BASS" appears in the display.
Press the or
to adjust the bass.
When you have finished the adjustment
Press the AUD button, 9.

Adjusting the treble

Press the AUD button, 9.
"BASS" appears in the display.
Press the or
as is necessary for "TREBLE" to appear
in the display.
Press the or
to adjust the treble.
When you have finished the adjustment
Press the AUD button, 9.
Loudness
Loudness refers to a bass boost at low vol-
ume levels matching the ear's sensitivity.
Press the AUD button, 9.
"BASS" appears in the display.
Press the or
as is necessary for "LOUD" to appear in
the display.
Press the or
to adjust the loudness. "LOUD OFF"
means that the loudness function is in-
active, while "LOUD 6" indicates the
maximum loudness boost.
When you have finished the adjustment
Press the AUD button, 9.
buttons, 7, in order
button, 7, as often
buttons, 7, in order
button, 7, as often
buttons, 7, in order
TONE AND VOLUME
Adjusting the left/right volume
balance
In order to adjust the balance, press the
AUD button, 9.
"BASS" appears in the display.
Press the or
as is necessary for "BAL" to appear in
the display.
Press the or
to adjust the balance between left and
right.
When you have finished the adjustment
Press the AUD button, 9.
Adjusting the front/rear volume
ratio (fader)
In order to adjust the fader, press the
AUD button, 9.
"BASS" appears in the display.
Press the or
as is necessary for "FADER" to appear
in the display.
Press the or
to adjust the balance between front and
rear.
When you have finished the adjustment
Press the AUD button, 9.
button, 7, as often
buttons, 7, in order
button, 7, as often
buttons, 7, in order
11