Repeating Tracks (Repeat); Changing The Display Contents; Programming Favourite Cd Tracks - Blaupunkt Hamburg CD70 Operating Instructions Manual

For information on setting the sampling dura-
tion, read the paragraphs on "Adjusting the
Sample Duration" in the "Radio Operation"
section.
Stopping the SCAN to continue listening
to a track
Press the softkey, 4, indicating "SCA"
again.
The track that is currently being sampled will
continue to be played.

Repeating tracks (REPEAT)

Press the softkey, 4, indicating "RPT".
The title will be repeated until RPT is deactiv-
ated.
Stopping REPEAT
Press the softkey, 4, indicating "RPT"
again.
Play continues as normal.

Changing the display contents

You can choose between different display
modes during CD operation:
Display of track number and time.
Display of track number and play time.
Display of CD name and track number.
In order to change between the display
modes, press the DIS button, :, as of-
ten as you need for the desired informa-
tion to be shown on the display.
Note:
It is only possible for a CD name to be dis-
played if the inserted CD has been provided
with a name. Read the section on "Naming
CDs".

Programming favourite CD tracks

You can use the TPM function (Track Program
Memory) to program, save and replay your
favourite tracks from a particular CD. You can
program the tracks in any order, but they will
be played in ascending order. If favourite track
play is active, only the tracks previously pro-
grammed will be played from the CD that is in
the drive. Up to 30 CDs with a maximum of
40 tracks on each can be handled.
Programming favourite tracks
Proceed as follows to program your favourite
tracks on a CD:
Insert the CD for which you want to pro-
gram your favourite tracks into the CD
drive.
Select your first favourite track.
Hold down the softkey, 4, indicating
"TPM" for longer than one second.
The track is accepted into the list of favourite
tracks for this CD.
Continue in the same way for all the oth-
er favourite tracks on the CD.
Switching favourite track play on and off
In order to begin playing the programmed fa-
vourite tracks on the inserted CD, or to stop
playing only the favourite tracks
briefly press the softkey, 4, indicating
"TPM".
The current TPM status ("TPM ON" or "TPM
OFF") is briefly displayed.
If favourite track play is active, "TPM" appears
on the display with light and shade reversed.
Deleting titles from the list
In order to remove individual entries from the
programmed list of favourite tracks on a CD
switch TPM on.
Select the title that is to be deleted.
Hold down the softkey, 4, indicating
"CLR" for about two seconds.
"TRCK CLR" appears briefly on the display,
and the track has been removed from the pro-
grammed list.
CD OPERATION
19