External Display - Panasonic Touchbook CF-17 series Reference Manual

External Display

External Display Port
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Connect the external display to your computer
N O T E
For more detailed information, please refer to the operation manual
of the external display.
3
Turn on the external display, then turn on your computer
You can select either an external display, LCD or simultaneous with
+ F3 .
In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility.
2
Using and
3
Using and
4
Using and
5
Press F10 , then select [Yes].
6
Select your external display.
Set your external display for [Monitor] in [Start] - [Settings] - [Con-
trol Panel] - [Display] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play stan-
dards is connected, select [Change] and make the monitor set-
tings.
( "Starting Up/Shutting Down")
( page 37 )
, select [Main].
, select [Display] and press
, select the display to use and press
2 9
Fn
Enter .
.
Enter