Panasonic Touchbook CF-17 series Reference Manual page 54

Dealing With Problems
Character Input
Only capital letters are
being input
How to input European
characters (ß, à, ç),
symbols or Euro Cur-
rency Symbol is unclear
Setup Utility
[Enter Password] is dis-
p l a y e d
[Advanced] menu can not
be registered
All or some items in [Se-
curity] menu can not be
r e g i s t e r e d
Application Software
C o m p u t e r h a n g s
Sound
The sound is not heard
The volume can not be
changed by pressing
+
Fn F5 or Fn
N o w a r n i n g s o u n d c a n
be heard
Unusual Sound
The computer produces
a strange sound
Timeout Function
The timeout functions
do not work
If is on, the Caps Lock function is ON. To switch it OFF, press
CapsLock
Caps Lock .
Select [Start] - [Programs] - [Accessories] - [Character Map]. The Character Map
will be displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Press Ctrl
After cutting the power by pressing the power switch for more than four seconds,
slide the power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel]
- [Add/Remove Programs] to delete the program. Then try installing the program
once again.
Try changing the mute by pressing
Has the Setup Utility been used to set [Speaker] to [Disable]?(
Under the condition the sound function of Windows is not working,
displayed, but the volume does not change.
+
F6
When a MIDI file or a WAVE file is played with another application, no warning
sound is generated.
If the computer enters the ECO mode or the LCD is closed while the computer is
making a sound, the computer may produce a strange sound, but this does not
indicate a problem.
If the computer has not been used for a long period of time, it may produce an
unusual sound at start up. The sound may continue for a short period of time,
but if the computer starts up in a normal manner, then the problem is not serious.
If, however, the computer fails to start up, contact Panasonic Technical Support.
If the Panasonic Battery Monitor is being displayed, please close it.
(Advanced)
+ Alt + Del to reboot the computer.
Fn
+ .
F4
5 4
page 38)
or is