Panasonic Touchbook CF-17 series Reference Manual page 6

Touch Pad (Advaced)
Using the Touch Pad
Work Surface
Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer
operations.
For instructions on how to handle the touch pad, refer to page 9.
The touch pad has the following two modes of operation.
®
Microsoft IntelliMouse
(Setting at the time of purchase)
Wheel mode operations (almost identical
t o t h e c a s e o f u s i n g t h e M i c r o s o f t
TM
IntelliMouse for scroll, zoom, etc., op-
erations) are possible for Microsoft
function-compatible applications.
® TM
Microsoft IntelliMouse
device that, in addition to the two conven-
tional buttons, incorporates a wheel able
to rotate forwards/backwards.
Scrolling Area
Scrolling up/down
For the Pan and Auto Scroll functions, the en-
tire work surface of the touch pad can be used
for scrolling.
: Typical mouse operations use this area.
When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and
[Vertical] of [Scroll Configuration], the entire surface can be used for typical mouse
operations.
N O T E
When you are not sure whether an application is compatible with the Microsoft
wheel function or not, try using both modes. Furthermore, depending on the appli-
cation, there are cases where scrolling may not be possible with either mode.
Changing the mode of the touch pad
1 Select from the taskbar and then select [Motion] or select [Motion] in [Start] -
[Settings] - [Control Panel] - [Mouse].
2 To set the Microsoft
Add the check mark
To set the original mode
Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration]
and add the check mark
3 Press [OK].
N O T E
The touch pad has been designed to work only when a finger is used. Therefore, do
not use any implement on the touch pad.
T M
Wheel Mode
Only scroll operation is possible for ap-
®
plications not compatible with the Mi-
crosoft
®
wheel
Even for applications compatible with the
Microsoft
is a mouse-type cases where only vertical scrolling or
only horizontal scrolling is possible in this
mode.
Scrolling Area
Scrolling side-to-side
Possible when a check mark
is added for [Horizontal].
® TM
IntelliMouse Wheel mode
for [IntelliMouse Wheel mode] of [Scroll Configuration].
for [Horizontal] and/or [Vertical] .
Original Mode
®
wheel function.
®
wheel function, there are
Scrolling up/down
Possible when a check
m a r k i s a d d e d f o r
[Vertical].
6
®