Usb Devices - Panasonic Touchbook CF-17 series Reference Manual

USB Devices

USB Port
CAUTION
After a driver has been installed, do not use the suspend or hibernation func-
tion. If the suspend or hibernation mode is activated, the computer may not
function properly. Power off, then on, using the power switch to resume proper
operation.
If you want to use the suspend or hibernation function when the USB driver is
installed, disable the USB device function of the computer.
Installing USB Devices
1
Set the power management function to disable
1
Run the Setup Utility.
2
Using and
3
Using and
4
Using and
5
Using and
6
Using and
7
Using and
8
Using and
9
Press F10 , then select [Yes].
2
Install the Windows 95 USB device drivers
1
In [Start] - [Run], input [c:\util\msupdate\usb\usbsupp.exe], then press [OK].
At the confirmation message, press [Yes].
2
Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].
• Installation will start if [Yes] is pressed.
• Installation will be aborted if [No] is pressed.
3
At the display indicating the completion of installation, press [OK]. The com-
puter will automatically restart.
4
In [Start] - [Run], input [c:\util\msupdate\usb\usbcopy.bat], then press [OK].
5
Click at the upper right corner to close the display. .
6
In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select
[PCI Universal Serial Bus] in [Other devices], press [Remove], then press
[OK].
7
Press [Refresh] and press [Close] at the [System Properties],
8
Restart the computer.
page 37
( )
, select [Power].
, select [Power Switch] and press
, select [Power Off] f] and press
, select [Panel Switch] and press
, select [LCD Off] and press
, select [Fn+F7/Fn+F10] and press
, select [Disable] and press
.
Enter
Enter .
.
Enter
.
Enter
.
Enter
.
Enter
(To next page)
3 0