Date, Time And Language Settings; Setting The Date And Time - Canon EOS C300 Mark II Instruction Manual

Date, Time and Language Settings

Date, Time and Language Settings

Setting the Date and Time

You will need to set the date and time on the camera before you can start using it. When the internal clock is not
30
set, or if the settings were lost because the lithium button battery is depleted, the [Set Clock > Date/Time] screen
will appear automatically with the time zone selected when you turn on the camera.
Operating modes:
1 Push the joystick up/down to select the desired time zone and then press SET to move to the next
field.
• To move to the next field you can also push the joystick right.
• The default time zone is [UTC-05:00] (New York) or [UTC+01:00] (Central Europe), depending on the
country/region of purchase. Time zones are based on Coordinated Universal Time (UTC).
2 Change the rest of the fields in the same way.
3 Select [Set] and then press SET to start the clock and close the screen.
NOTES
• You can display the date/time in
[Date/Time] setting.
• With the following settings*, you can change the time zone, date and time also after the initial setup. You can
also change the date format and clock format (12 or 24 hours).
System Setup] > [Time Zone]
- [
System Setup] > [Set Clock] > [Date/Time] and [Date Format]
- [
• When the lithium button battery is depleted, all menu settings may be lost. In such case, replace the lithium
button battery (CR2025) and perform the initial setup again.
• Using the optional GP-E1 GPS Receiver, you can have the camera adjust settings automatically according to
the UTC date/time information received from the GPS signal (A 108).
* These settings are not available while Browser Remote (A 120) is activated.
mode with the [¢ Picture/Terminals Setup] > [Custom Display 2] >