Canon EOS C300 Mark II Instruction Manual page 35

Using the Virtual Keyboard Screen
When the monitor unit is attached to the camera and the LCD screen is used, the full keyboard screen will
appear on the screen. When the monitor unit is not attached to the camera, a simplified screen for entering
text will appear on the viewfinder.
1 Use the joystick to select a character and then press SET to
add it.
• On the full keyboard: Push the joystick up/down/left/right to
select the desired character and press SET to enter it. Use the
arrows ( / // ) to change the position of the cursor and the
backspace character (
You can also press the MENU button to delete the last
character.
On the simplified screen: Push the joystick up/down or turn the
SELECT dial to select the desired character and press SET to
enter it. Press the MENU button to delete the last character.
• If you are entering sensitive information, like a password, the
character you entered will change to " " after a moment to
protect the password.
• Repeat this step as necessary to enter the desired text.
2 After entering the desired text, select [OK] in the full
keyboard, or [Set] in the simplified screen, and then press
SET to close the keyboard screen.
) to delete the last character entered.
Using the Menus
Full keyboard on the LCD screen
Current character / Character limit
Simplified screen
35