Advertisement
5
Load Paper and Calibrate
a) Insert 4x6 photo paper glossy side down
and push the photo tray in until it clicks
into place. The photo tray light should
illuminate when the tray is properly
inserted.
Need More Help?
For printer support, please go to
www.kodak.com/go/aiosupport
b) Once the ON/OFF indicator is a steady
Green, press Start and allow the
printer to print a calibration sheet.
or www.kodak.com/go/contact.
www.kodak.com/go/aiosupport
5100/5300
c) Remove the calibration sheet from the
output tray. Place it face down and align
to the registration marks in the proper
corner of the scanner glass, as shown.
5500
d) Lower the scanner lid and press Start.
Wait 2 to 3 minutes for the calibration
sheet to print.
3
Advertisement
