Nautilus T7000 Owner's Manual page 12

Step 3: Attach the console to the console mast
1).Connect the right side of console cables and carefully tuck wires in mast to avoid damage.
2).Assemble the console into the console mast.
3).Fasten console mast and console by hex wrench with 8pcs M5x15mm screws and 8pcs curve
washers.
4).Put 4pcs plastic end cap into console lower cover.
5).Tighten the bolts (From Step 2) of console mast with base frame console tube.
6). Slide the console mast cover and packing down, and secure using the M5*15mm bolt.
#3-8
X8
#3-5
M8 curve
washer X8
#3-7
X4
#3-16
X4
Please tear the protective film away from side rails, and paste the non-slip
the appropriate position.
non-slip appliqué
11
appliqué in