Kyocera KM-4230 Service Manual page 457

2A3/4
(15) Image is partly missing.
Causes
1. Paper damp.
2. Paper creased.
3. Drum condensation.
4. Flawed drum.
(16) Fixing is poor.
Causes
1. Wrong paper.
2. Defective pressure springs.
3. Flawed press roller.
3-6-12
Causes
1. Paper damp.
2. Paper creased.
3. Drum condensation.
4. Flawed drum.
Check procedures/corrective measures
Check the paper storage conditions.
Replace the paper.
Clean the drum (see page 3-3-50).
Replace the drum (see page 3-3-45).
Causes
1. Wrong paper.
2. Defective pressure springs.
3. Flawed press roller.
Check procedures/corrective measures
Check if the paper meets specifications.
Replace the pressure springs.
Replace the press roller (see page 3-3-71).