Gear - Kyocera KM-4230 Service Manual

2A3/4
Load developer.
1. Remove the two screws and unlock the two hooks to remove the developing
unit upper cover.
Caution: Place the developing unit on a level surface when loading developer.
2. Shake the developer bottle well to agitate the developer.
3. While turning the developing gear in the direction of the arrow in the diagram,
uniformly pour developer into the developing unit.
Caution: Never turn the developing gear in the reverse direction.
4. Refit the developing unit upper cover using the two screws.
3-1-18
Hook
Figure 3-1-20
Developing gear
Developer
Figure 3-1-21 Loading developer
Screws
Hook
Developing unit upper cover