Kyocera KM-4230 Service Manual page 16

2A3/4
Developing system ............... Dry, reverse developing (magnetic brush)
Transfer system .................. Single negative corona charging, –210 µA
Separation system ............... Single AC corona charging
Fixing system ..................... Heat roller
Charge erasing system ......... Exposure by cleaning lamp
Cleaning system .................. Cleaning blade
Scanning system .................. Flat bed scanning by CCD image sensor
Bit map memory .................. 12 MB (standard)
Image storage memory ......... 32 MB (standard)
Resolution ........................... 600 × 600 dpi
Light source ........................ Inert gas lamp (12 W)
Dimensions ........................ 627 (W) × 748 (D) × 841 (H) mm
Weight .............................. 129 kg/283.8 lbs
Floor requirements ............... 1287 mm (W) × 748 (D)mm
Functions ........................... (1) Self-diagnostics
1-1-2
Developer: 2-component, ferrite carrier and N29T black
toner
Toner density control: toner sensor
Toner replenishing: automatic from a toner cartridge
Heat source: halogen heaters (main 850 W, sub 850 W)
Control temperature: 180˚C/356˚F (at normal ambient
temperature)
Abnormally high temperature protection devices:
140˚C/284˚F thermostat
Fixing pressure: 210 N
" (W) × 29
11 7
24 / /
16 16
" (W) × 29
5 7
50 / /
16 16
(2) Preheat
(3) Automatic copy density control
(4) Original size detection
(5) Automatic paper selection
(6) Automatic magnification selection
(7) Enlargement/reduction copy
(8) Fixed ratio selection
(9) Size zoom mode
(10) XY zoom mode
(11) Photo mode
(12) Duplex copy
(13) Margin copy
(14) Print page numbers function
(15) Split copy
(16) Border erasing
(17) Sheet copy
(18) Transparency backing sheet function
(19) Form overlay
(20) Combine copy
(21) Booklet + cover copy
(22) Sort copy
(23) Invert copy
(24) Mirror image mode
" (D) × 33
1
/ " (H)
8
" (D)