Lower Heat Roller; Cleaning Pad; Paper Exit Section - Sharp AR-M207 Service Manual

G. Lower heat roller
Assembly: When installing the paper guide (3) before fusing, fix the
paper guide fixing plate with screws temporarily so that the
paper guide fixing plate (2) is in contact with the frame
bottom under fusing (A). Fit the mark (B) on the fusing front
paper guide (3) with the top of the rib (C), and tighten the
screw securely.
Grease(JFE552)
(3)
(1)
(2)
(A)
(2)
H. Separation pawl
(4)
(1)
(C) (B) (B) (C)
AR-M207 M165 M162 DISASSEMBLY AND ASSEMBLY 10-6
I. Cleaning pad
How to clean paper dust on the fuser cleaning felt.
Remove Fusing rear paper guide from Fusing unit during every periodic
maintenance (50K) and clean the collected paper dust using a ruler or
other straight-edge device.
Replace the cleaning felt at 150k or earlier if damaged.
Fusing rear paper guide

4. Paper exit section

No.
A Ozone filter
B Cooling fan
C Paper exit unit
D Transport roller
E Paper exit roller
F Paper exit interface P.W.B.
G Paper exit sensor / duplex sensor
A. Ozone filter
(1)
(1)
(2)
Cleaning
felt AS
Paper dust
Content
(1)
(2)
(1)
(1)
(1)
(2)