Unpacking And Inspection - Cornelius Alta 1522 Installation Instructions Manual

UNPACKING AND INSPECTION

The unit was thoroughly inspected before leaving the factory and the carrier has accepted and signed for it. Any
damage or irregularities should be noted at the time of delivery and immediately reported to the delivery carrier.
Request a written inspection report from Claims Inspector to substantiate any necessary claim.
NOTE: IMI Cornelius is not responsible for damaged freight. If damage is found, you must save all packag-
ing material and contact the freight carrier. Failure to contact the carrier within 48 hours of receipt
may void your claim.
1. Inspect the carton and note any damage, regardless if it appears minor. If the carton is damaged, note on the
consignee copy of the freight invoice "exterior carton damage – concealed damage possible" and contact the
freight company immediately.
2. Remove any staples along the bottom edge of the carton and lift the carton off the pallet.
3. Remove the exterior carton sleeve, internal fillers and plastic bag around the unit. Carefully inspect the unit
for damage.
4. Remove the bolts holding the dispenser to the pallet.
5. Remove the packing fillers from the top of the unit.
6. Inspect the dispenser cabinet and make sure it has no scratches, dents or any other cosmetic defects.
7. Make sure that the glass or plastic merchandiser panels are not scratched or cracked.
8. Open the packages of loose parts and inspect all of the parts for damage or missing parts. Check the parts
received against the packing list to insure receipt of all parts.
© 2013-2014, Cornelius Inc.
Alta 1522 Drop-in Dispenser Installation Instructions
- 3 - Publication Number: 741200028INS