Table of Contents
Advertisement
Warning
It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment is
provided with protection against backflow by an air gap as defined in ANSI A112. 1.2-1979; or
an approved vacuum breaker or other such method as proved effective by test. and must comply
with all federal, State, and Local codes.
Failure to comply could result in serious injury,death or damage to the
equipment.
Water pipe connection and fixtures directly connected to potable water supply shall be sized,
intalled and maintained according to Federal,State and Local laws.
D
ELIVERY
Inspection
Upon delivery inspect the unit for damage or irregularities and immediately
report problems to the delivering carrier and !le a claim with that carrier.
Unpacking
Remove shipping tape and other packing material.
Unpack the loose parts and make sure all items are present.
INSTALLATION
I
A
NSPECTION
ND
LOOSE PARTS
Name
Cup rest
Drip tray
Drain hose
Hose clamp
Service Manual
U
NPACKING
- 7 -
Quantity
1
1
1
1
1
© 2010, IMI Cornelius Inc.
Advertisement
Table of Contents
