Dtmf Paging System - Vertex Standard VX-820 Series Operation Manual

C u /d
oWn ( 16-
hannel p
Press the assigned programmable key to select a dif-
ferent channel within the current group.
s
et ( 16-
& 4-
Key Key
Press the assigned programmable key to activate the
"User Set" (Menu) Mode. See page 32 for details
Call/reset
While the DTMF Paging System
This feature, if enabled, allows the user to change the
3-digit Page Call code, used to call other similarly-
equipped stations. Press the assigned programmable
key, followed by the three digits representing the Page
Call code of the station you wish to call. Three tones
will be heard after the last key is pressed (the new
code will now be transmitted). The receiver squelch
of the other station will be opened, and you can begin
communication.
While the 2-Tone/5-Tone Paging System
This feature, if enabled, press the assigned program-
mable key to send a 2-tone/5-tone sequential tone.
C 1 C
all to all
Press the assigned programmable key to send a
2-tone/5-tone sequential tone group which is pre-
defined.
28
a
dVanCed
& 4- V
Key Key ersion only
)
V
ersion only
5
o
peration
C u /d
) oWn ( 16-
ode p
Press the assigned programmable key to select a
2-tone/5-tone encode code from the pre-defined en-
code list.
C s
et ( 16-
ode
Key
Press the assigned programmable key to change the
encode digits for 5-tone operation. To change a spe-
cific digit, select the desired digit using the [ A ] key,
then change the number using the [ B ] / [ C ] keys, and
store the number using the [ D ] key.
s d
ial ( 16-
peed
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the assigned programmable
key, then press the front panel's numeric key corre-
sponding to the Auto-Dial memory number list pro-
vided by your Dealer or Network Administrator. The
DTMF tones sent during the dialing sequence will be
heard in the speaker.
o sW1
ption
Press the assigned programmable key to toggle the
optional accessory "1" "On" and "Off".
VX-820 S
& 4- V
Key Key ersion only
)
& 4- V
Key ersion only
)
V
Key ersion only
O M
erieS perating
)
anual