Before You Begin; Battery Charging (Vac-Uni: Cd-58/Pa-55) - Vertex Standard VX-820 Series Operation Manual

Battery Charging ( VAC-UNI: CD-58/PA-55 ) for the FNB-V127LI-UNI/-V128LI-UNI/-V129LI-UNI
r Install the Spacer Plate to the nest of the optional
CD-58 Desktop Charger, if the Battery Spacer is
not installed.
r Insert the DC plug from the optional PA-55 AC
Adapter into the DC jack on the rear panel of the
optional CD-58 Desktop Charger, and then con-
nect the PA-55 AC Adapter to the AC line outlet.
r Insert the battery pack into the CD-58 Desktop
Charger while aligning the slots of the battery
pack with the guides in the nest of the CD-58;
refer to the following illustration for details on
proper positioning of the battery pack. If charging
with the transceiver attached, turn the transceiver
off. The antenna jack should be at the left side
when viewing the charger from the front.
r If the battery pack is inserted correctly, the LED
indicator will glow red. A fully-discharged battery
pack will charge completely in 1.5 - 3.0 hours
(depending on the battery pack being charged).
r When charging is completed, the LED indicator
will change to green.
r Disconnect the battery pack from the CD-58
Desktop Charger and unplug the PA-55 AC
Adapter from the AC line outlet.
14
B y B
efore ou egin
Spacer Plate
AC Line Outlet
PA-55
CD-58
VX-820 S O
erieS perating
M
anual