Battery Charging (Vac-920: Cd-31/Pa-42) - Vertex Standard VX-820 Series Operation Manual

Battery Charging ( VAC-920: CD-31/PA-42 ) for the FNB-V86LIA/-V87LIA/-V92LI/-V92LIIS
r Insert the DC plug from the PA-42 AC Adapter
into the DC jack on the bottom side of the CD-31
Desktop Rapid Charger, then plug the PA-42 AC
Adapter into the AC line outlet.
r Insert the battery pack into the CD-31 Desktop
Rapid Charger while aligning the slots of the bat-
tery pack with the guides in the nest of the CD-
31; refer to the illustration at the right for details
on proper positioning of the pack. If charging
with the transceiver attached, turn the transceiver
off, and the antenna jack should be at the left side
when viewing the charger from the front.
r If the battery pack is inserted correctly, the LED
indicator will glow red. A fully-discharged pack
will be charged completely in 1.5 - 3.0 hours (de-
pending on the battery pack being charged).
r The LED indicator will blink red/green alternately
when charging is nearing completion.
r When charging is completed, the LED indicator
will change to green. Even if the charging is com-
pleted, the LED indicator will sometimes change
to red for trickle charging.
r Disconnect the pack from the CD-31 Desktop
Rapid Charger, and unplug the PA-42 AC Adapter
from the AC line outlet.
16
B y B
efore ou egin
Insert the DC plug from
the PA-42 AC Adapter
into the DC jack of the
CD-31 Desktop Rapid
Charger.
Align the slots of the battery pack
with the guides in the nest of the
CD-31 Desktop Rapid Charger.
VX-820 S O
erieS perating
M
anual