Arts (Auto Range Transpond System); Dtmf Paging System - Vertex Standard VX-2200 SERIES Operating Manua

HA (H A
ORN LERT
When the Horn Alert feature is enabled, a tone will sound from the speaker if you
receive a call (with appropriate DTMF signaling) from the base station.
Press (or press and hold) the assigned programmable key to disable the Horn
feature. When you disable the Horm feature, the "HA" will disappear from the
LCD.
Press (or press and hold) the assigned programmable key again to activate the
Horn Alert feature; the "HA" will appear on the LCD.
K L
EY OCK
Press (or press and hold) the assigned programmable key to lock the various aspects
of the VX-2200's keys, and the PTT switch. The precise lockout configuration must
be programmed by your VERTEX STANDARD dealer.
SET
Press the assigned programmable key to activate the "User Set" (Menu) Mode.

ARTS (Auto Range Transpond System)

This system is designed to inform you when you and another ARTS-equipped station
are within communication range.
During ARTS operation, when the radio receives an incoming ARTS signal, a short
beep will sound, and "In" ("In Service") will be displayed on the LCD for 2 seconds.
If you move out of range for more than two minutes, your radio senses that no signal
has been received; a short triple-beep will sound, and "Out" ("Out of Service") will
be displayed on the LCD for 2 seconds. If you subsequently move back into commu-
nication range, as soon as the other station transmits, a short beep will sound and
"In" will be displayed again on the LCD for 2 seconds.

DTMF Paging System

( Requires the optional FVP-25 Encryption/DTMF Pager Unit )
This system allows paging and selective calling, using DTMF tone sequences.
When your radio is paged by a station bearing a tone sequence which matches yours,
your radio's squelch will open and the alert will sound. The three-digit code of the
station which paged you will be displayed on your radio's LCD.
14
A
DVANCED
)
O
PERATION
VX-2200 S
ERIES
O M
PERATING ANUAL