Arts (Auto Range Transpond System); Dtmf Paging System; Mdc1200 ® Encoding; Caller Id Display - Vertex Standard VX-7200 Operating Manual

ARTS (Auto Range Transpond System)

This system is designed to inform you when you and another ARTS-equipped sta-
tion are within communication range.
During ARTS operation, when the radio receives an incoming ARTS signal, a short
beep will sound, and "
move out of range for more than two minutes, your radio senses that no signal has
been received; a short triple-beep will sound, and "
be displayed on the Sub-LCD. If you subsequently move back into communication
range, as soon as the other station transmits, a short beep will sound and " In " will
be displayed again on the Sub-LCD.

DTMF Paging System

This system allows paging and selective calling, using DTMF tone sequences.
When your radio is paged by a station bearing a tone sequence which matches
yours, your radio's squelch will open and the alert will sound. The three-digit code
of the station which paged you will be displayed on your radio's LCD.
MDC1200
®
Generally MDC1200
It can be used to identify the calling radio or emergency call, and also use to con-
trol special functions of the receiving radio.
RSSI Beep
This feature allows you to inform the Receiving Signal Level while operating on
the APCO Project 25 Digital System.
When the Receiving Signal Level is weaken, the alert will sound every one second.
When the Receiving Signal Level is weaken still more, the alert will sound every
1/2 second.

Caller ID Display

This feature is available on the APCO Projetct 25 Digital System.
The Caller ID will appear on the LCD display when receiving Unit to Unit call
(Paging).
Caller ID: Tag information will appear when receiving the Source ID which
listed at the Destination ID table on your radio, otherwise received
Source ID will appear.
26
A
dvAnCed
" ("In Service") will be displayed on the sub-LCD. If you
Encoding
®
Data Burst is a type of ANI.
O
PerATiOn
VX-7200 S
erieS
" ("Out of Service") will
O M
perating anual