Mail - Revo RH16NVR1 Operation Manual

Mail

Configure Mail settings.
Select the + icon at the bottom left corner of the
screen to add a mail account.
Select Recipient and then enter the mail address and
server information.
The recipient's mail address must be in the correct
email format and contain the @ symbol.
Select the icon to attach event recordings to
outgoing mails.
Select the icon to delete the account.
Select MP4 Clip to attach event recordings to
outgoing mails.
The event recordings generated by a camera can
be attached only. Select the MP4 Clip option at the
bottom to attach .mp4 video clips.
SMTP Setup
Select SMTP Setup at the bottom right corner of the
screen to configure an SMTP server.
1
Select the SMTP server Type.
2
Enter the SMTP Server's IP address or domain
name and then configure the Port and Sender
settings.
Default SMTP server port number is 25. Select Test to
send out a test mail using the current settings. Select
Use SSL/TLS to use an SMTP server that requires
SSL connections.
• If you have configured the DNS Server setting
under Network - IP Address, you can enter
the STMP server's domain name instead of its IP
address in the SMTP Server field.
• Address entered under Sender must be in the
correct email format and include the @ symbol.
If user authentication is required by the SMTP server,
select Use and then enter the User and Password
information.
3
Select OK to apply and exit.
This product contains content developed by
OpenSSL Project for use in Open SSL Toolkit (http://
www.openssl.org/).
Part 3 - Configuration
53