Revo RH16NVR1 Operation Manual page 27

1 Layout
Used to change the screen layout to single screen,
2x2, 3x3, or 4x4.
2 Display
• OSD (On Screen Display): Enables/disables the
OSD feature.
• Aspect Ratio: Select whether to enable the
original aspect ratio of video transmitted from the
camera.
3 Previous/Next Group
Loads the previous/next screen group.
4 Search Mode
• Time-Lapse Search: Select Search Mode >
Time-Lapse Search to search for and play back
saved data directly from the record table.
• Event Log Search: Select Search Mode >
Event Log Search to search for event logs and
play back associated event recordings.
5 Select Camera
Displays the selected camera in a single screen
format.
6 Sequence
Initiates Sequence in the same manner as pressing
the SEQUENCE button while in Live mode. To
exit, select Sequence once more or press the
SEQUENCE button on the remote control. The
icon is displayed on the bottom left part of the
screen while Sequence is in progress.
Full Sequence
Sequence
Displays all channels in sequence while in Live mode
(single and split screen settings). In order to use the
Full Sequence feature, Full Sequence (Display Setup
- Main Monitor > Sequence) must first be enabled.
e.g.) Full Sequence in 2x2 split screen mode
Cameo Sequence
In Cameo Sequence mode, only the bottom right
screen in a split screen setup changes sequence. In
order to use the Cameo Sequence feature, Cameo
Sequence (Display Setup - Main Monitor > Sequence)
must first be enabled.
e.g.) Cameo Sequence in 2x2 split screen mode
• If using the Full Sequence setting, page numbers
appear on the system status area on the bottom
left part of the screen, next to the Sequence icon.
• Pages are skipped under the following
circumstances:
– If all cameras included in the page are
deactivated.
– If there are no video signals.
– If the page contains "covert" cameras.
– If the user does not have permission to view
feeds from the cameras.
7 Freeze
Freezes the screen. Select Freeze again to
unfreeze.
8 Panic Recording
Activates/deactivates Panic Recording.
9 Alarm
Pressing this button while the alarm has been
activated resets all NVR outputs, including the built-
in buzzer.
Part 2 - Getting Started
27