Revo RH16NVR1 Operation Manual page 31

Setting Up a PTZ Preset
While in PTZ mode, select the VIEW button on the
remote control to display the Set Preset window and
assign the current position as a preset.
While in PTZ mode, select the SAVE button on
the remote control to display the Move to Preset
window. Select a preset to move the current PTZ
camera to the selected preset's position.
Advanced Settings
In PTZ mode, selecting a camera and then clicking
Menu button loads the Advanced PTZ screen as
shown below. This menu lists Speed, Auto Pan, and
other advanced PTZ camera control options available
for the camera. Options that are not available for the
selected PTZ camera remain inactive.
You can use the mouse to control PTZ cameras.
Left-click on the mouse and drag to move the
camera in the desired direction and use the mouse
wheel to zoom in/out.
While in PTZ mode, place the mouse pointer close
to the bottom edge of the screen to display the PTZ
Tools window.
• The exact PTZ protocol supported by the camera
must be specified in order to use the NVR's PTZ
controls.
• Drag and drop to reposition the PTZ Tools
window.
• Select the icon to hide the PTZ Tools window.
Part 2 - Getting Started
PTZ Camera Pan and Tilt
Zoom In/Out
Focus Near / Far
IRIS Open / Close
One Push
Set / Move to Preset
Advanced PTZ
31