Table of Contents
Advertisement
Setting
The following settings can be made:
Menu
Picture Adjust
Lamp Mode
Setting
High Bright
System
Aspect
Display
VCR Mode
Config
Cinema
Trigger 2
Iris
Preset
Black Setup
Lamp Mode
High, Low
High Bright
On, Off
High Bright On : Display brightest image.
Aspect
Full, Normal, Zoom, Through
VCR Mode
On, Off
Cinema
Auto, Off
Cinema mode : The 3-2 pull down for NTSC
and the 2-2 pull down for PAL
Iris
F5.0, F3.0
Sets the lens aperture.
F5.0: Use to prioritize contrast.
F3.0: Use to prioritize brightness.
Black Setup
0IRE, 7.5IRE /
NORMAL, EXPAND (For DVI input)
Black level adjustment, for adjusting black
level by a video source.
VCR Mode
ON :
A projector is forced into the intra-field only deinterlacing mode.
OFF :
A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion
adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown
for 625/50 sources).
❖
Setting the Setting Menu
1.
Select the desired menu item and press the
Setting items appears on the screen.
3
4
2.
Press the
and
buttons to select a setting.
1
3.
Press the
button to enter the setting and return to menu item selection.
User A1
High
Off
Normal
Off
Auto
F5.0
0 IRE
2
button.
MENU
2
1, 3
INPUT
V-MUTE
2.
ENTER
1, 3
ASPECT
27
Advertisement
Table of Contents
