Initial Setting; Turning On The Power; Zooming And Focusing; Detail Focusing - Marantz VP-11S1 User Manual

INITIAL SETTING

Turning on the Power

1.
Connect the supplied AC power cord. (
2.
Press the ON button on the remote controller or the
The ON indicator lights up.

Zooming and Focusing

Project an image on the screen roughly at first.
1. Turn the Zoom ring and adjust to the desired size
within the zoom range.
WIDE: Enlarges (zooms in) the projected image.
TELE: Reduces (zooms out) the projected image.
2.
Turn the Focus ring until the image on the screen
becomes clear.
P.9)
/ I button on the projector.
STANDBY ON
IRIS LAMP C.TEMP GAMMA
COMP.1 COMP.2 S-VIDEO USER
C1 C2 S G1
HDMI 1 HDMI 2 VIDEO
H1 H2 V G2
AUX 1 AUX 2
A1 A2 RGB G3
THTR STD DYN G4
WIDE
TELE

Detail Focusing

You can strictly focus the image with focus pattern.
1.
Press the PATTERN button to project the focus pattern on the screen.
2. Turn the Focus ring to make an adjustment.
Adjust the focus for the sharpest image possible to obtain, using focus pattern.
3. Press the PATTERN button again to hide the focus pattern. This completes fine focusing.
Note :
Focus Pattern Color by Lens Shift Position (
The focus pattern changes color depending on the lens position. There are two colors and they can
be used for checking the quality of the projected image. The white focus pattern uses the highest
optical performance to maximize the sharpness of the projected image. To enjoy the highest
sharpness, it is recommended to position the lens within this range.
1.
When the lens is shifted outside the aforementioned range, the focus pattern turns green. Rough
focusing in this range looses image sharpness.
2.
Adjusting the zoom position from WIDE to TELE enhances sharpness even at the same lens
position.
V-MUTE MENU
M
INPUT
ENTER
A I
ASPECT INFO.
CINEMA VCR MODE BLACK LEVEL PATTERN
BLACK
FULL NOR ZOOM THRU
P.15)
11