Marantz VP-15S1 User Manual
  1. Manuals
  2. Brands
  3. Marantz Manuals
  4. Projector
  5. VP15S1 SERIES
  6. User manual

Marantz VP-15S1 User Manual

Marantz user guide dlp projector vp-15s1
Hide thumbs Also See for VP-15S1:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Model VP-15S1 User Guide
DLP
®
Projector

Advertisement

Table of Contents
loading

Related Manuals for Marantz VP-15S1

Summary of Contents for Marantz VP-15S1

  • Page 1 Model VP-15S1 User Guide ® Projector...

  • Page 2: Important Safety Instructions

    Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Marantz America, Inc. Type of Product: Model: 100 Corporate Drive, Mahwah, NJ, 07430, U.S.A.
  • Page 3 • If the lamp breaks, unplug the AC power cord easily accessible. from AC power outlet and call for Marantz authorized dealer to replace it. Do not replace the lamp yourself or clean up broken glass...
  • Page 4 REGLAGE DE L’ALIMENTATION – Pour monter le projecteur au plafond, vous SECTEUR DE L’APPAREIL Cet appareil Marantz a été conçu pour respecter – Ne regardez pas dans l'objectif quand le les exigences de votre région en matière d’alimentation secteur et de sécurité.
  • Page 5 – Cuando se eliminen baterías usadas, deben seguro o se ponga en contacto con Marantz. IMPORTANTE Cuando solicite el servicio otorgado por la garantia –...
  • Page 6 – Quando o projector for montado no tecto, o REGULAÇÃO DO EQUIPAMENTO CONFORME A ALIMENTAÇÃO DA REDE O seu produto Marantz foi condicionado a – Não olhe para dentro da lente quando o satisfazer os requisitos domésticos de energia e segurança existentes na sua zona.
  • Page 7 Lampe zerbricht, groß. Wir empfehlen, die Lampe gegen Ende ihrer festgelegten Lebensdauer auszutauschen. Verwenden Sie die Lampe nicht nach ihrer maximalen Beleuchtungslebensdauer. • Verwenden Sie nur die originellen Marantz- Lampeneinheiten. Überprüfen Sie, ob der Modellcode der Lampeneinheit mit dem in der Bedienungsanleitung angeführten Code übereinstimmt.
  • Page 8 Questa è una lampada SHP di vetro a vapori di FUNZIONAMENTO DELL’APPARECCHIO mercurio ad alta tensione. Potrebbe rompersi o Il vostro apparecchio Marantz è stato predisposto guastarsi se non viene maneggiata correttamente durante la sostituzione o se il proiettore è soggetto per l’adattamento alla tensione ed alle norme di...

  • Page 9: Table Of Contents

    Keystone Correction...12 INSTALLATION ...13 Recommended Setting...13 Screen Size and Projection Distance (inch) VP-15S1...14 Screen Size and Projection Distance (mm) VP-15S1 ...14 Screen Size and Projection Distance (inch) VP-15S1L...15 Screen Size and Projection Distance (mm) VP-15S1L ...15 Lens shift position VP-15S1 ...16 Lens shift position VP-15S1L ...17...

  • Page 10: Important Safeguards

    There is potential glass particle hazard if the lamp ruptures. Caution Concerning the Lamp Unit There is a potential hazard of glass particle if the lamp ruptures. In case of lamp rupture,contact your nearest Marantz Authorized Dealer or Service Center for a replacement. See “Replacing Lamp Unit”. ( P.31)

  • Page 11: Features

    IC featuring Gennum’s proud “VXP contouring technology, “TruMotionHD ”, “FineEdge ”, “RealityExpansion • Konica Minolta optical system custom-made for Marantz. • A large 98mm 6-segment color wheel. • 4 Picture Modes (Theater, Standard, Dynamic, User) •...

  • Page 12: Projector Layout And Functional Overview

    It is almost impossible to have zero pixel defects, even using the most advanced technology. This is not a problem only for Marantz, but all DLP ® projector manufactures. Therefore we have to note that the warranty does not cover the ®...

  • Page 13: Rear And Terminals View

    Connect them to the component video output of a video device, AV amp/processor, DVD m REMOTE IN/OUT player, etc. By connecting this projector to another Marantz v S-VIDEO IN audio component using a supplied System Control cable, you can remotely operate the components Connect the S-VIDEO output from a video as a single system.

  • Page 14: Remote Controller

    Select the HDMI 2 IN signal. ¡1 VIDEO button ( Select the VIDEO IN signal. ¡2 A1 button This button does not work with this projector. ¡3 A2 button This button does not work with this projector. ¡4 RGB button ( Select the RGB IN signal.
  • Page 15 £7 INPUT (Input signal select) button ( P.18) Selects the input signal. Every time the 3/4 buttons are pressed, the input signal rotates in the order of COMPONENT 1 ↔ COMPONENT 2 ↔ S- VIDEO ↔ VIDEO ↔ RGB ↔ HDMI 1 ↔ HDMI 2. £8 BLACK LEVEL button ( P.26) Sets the black level.

  • Page 16: Remote Controller Operational Range

    Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor. Remote Controller VP-15S1 Remote Controller VP-15S1...

  • Page 17: Connection

    • Be sure to grab the plug, not the cable itself. Connection with AC Power Supply Connect the supplied AC power cord into the AC IN socket of the projector. The STANDBY indicator lights up and the projector goes into the standby mode.

  • Page 18: Connection With A Hd-Video, Dvd Player, Satellite, Cable Tuner Or Pc

    Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC You can connect this projector to HD-Video /PC using RGB IN port, or DVD Plyer /Satellite /Cable Tuner /PC using HDMI IN port. Connect one end of the RGB cable to the RGB IN port, or one end of the HDMI cable to the HDMI IN port on the projector.

  • Page 19: Initial Setting

    Connect the supplied AC power cord. ( P.9) Press the ON button on the remote controller or the / I button on the projector. The ON indicator lights up. Zooming and Focusing Project an image on the screen roughly at first.

  • Page 20: Adjusting The Image Position

    Turn the adjuster to fine-adjust the height. ❖ Returning the Projector to its Initial Position Slightly lift the projector, turn the adjuster lever to the left or right, then carefully set the projector down. Keystone Correction Counterclockwise When the projecting image is a trapezoid, correct it in Keystone and in the Display Menu.

  • Page 21: Installation

    CAUTION – For ceiling installation, consult with Marantz authorized dealer. – Do not look into the lens when the projector is turned on. It could damage your eyesight. Screen upper end Height from installing level to light axis...

  • Page 22: Screen Size And Projection Distance (Mm) Vp-15S1

    To calculate the installation measurement (unit : inch) Minimum = 1 5/16 x Screen Size - 2 2/16 Maximum= 1 14/16 x Screen Size - 1 15/16 When installing the projector, consider ±5% tolerance for the Projection Distance in the above table. Note : ❖...

  • Page 23: Screen Size And Projection Distance (Inch) Vp-15S1

    To calculate the installation measurement (unit : inch) Minimum = 2 13/16 x Screen Size - 2 9/16 Maximum= 1 14/16 x Screen Size - 2 9/16 When installing the projector, consider ±5% tolerance for the Projection Distance in the above table. Note : ❖...

  • Page 24: Lens Shift Position Vp-15S1

    Lens shift position VP-15S1 ❖ Standard condition (From -85% to +100%) Screen Position (+100%) VP-15S1 0% (Center) -85% ❖ Extended mounting condition (From +100% to +165%) 0.5H VP-15S1 0.4H Down CAUTION: In the expanded mounting condition (green focus pattern), the corners of the picture may appear dark or distorted.

  • Page 25: Lens Shift Position Vp-15S1L

    Lens shift position VP-15S1L ❖ Standard condition (From -85% to +165%) Screen Positon +165% 0.8 H Up VP-15S1L 0% (Center) 0.4H Down -85% Screen Height = 1H...

  • Page 26: Basic Operations

    Switch to the equipment connected to the projector. Every time the INPUT button of the projector or the INPUT 3 button of the remote controller is pressed, the input signal rotates in the order of COMPONENT 1 ➔ COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔...

  • Page 27: The Screen Images In A 16:9 Screen

    The Screen Images in a 16:9 screen • Press the ZOOM button, the NORMAL button or the FULL button on the remote controller for the 4:3 aspect ratio video source. • Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems.

  • Page 28: The Screen Images In A 4:3 Screen

    / I button on the projector after the projector turns into standby mode. - When on standby, power to the projector is not OFF completely. If not planning to use the projector for an extended period of time, unplug the AC power cord from AC power outlet as explained above.

  • Page 29: Operations

    OPERATIONS Main Menu Menu Structure Input Signal P.27 Main Menu Item Picture Mode Theater Default / 1* / 2 / 3 P.24 Standard Default / 1* / 2 / 3 Dynamic Default / 1* / 2 / 3 User 1* / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Picture Adjust Gamma P.25...

  • Page 30: Functions By Signal

    Functions by Signal NO SIGNAL ANY INPUT Picture Mode Theater – Standard – Dynamic – User – Picture Adjust Gamma – Contrast – Brightness – Color – Tint – Sharpness – Color Temp. – Lamp Mode – Iris – Fine Menu 1 Noise Reduction –...
  • Page 31 NO SIGNAL ANY INPUT HDMI CSC HDMI 1 CSC HDMI 2 Deep Color HDMI 1 Deep Color HDMI 2 Display Keystone Scale – Width – Position H – Position V – Installation OSD/Blanking Menu Position Language Status Info. Power-OFF Confirm. Blanking Memory –...

  • Page 32: Picture Mode

    This unit has four picture modes: Theater, Standard, Dynamic and User. The picture quality recommended by Marantz is already set for each mode. The User mode has eight gamma curves that can be chosen and saved by users. Also, the Theater, Standard and Dynamic modes three indexes for memorizing picture quality adjustments.

  • Page 33: Picture Adjust

    Picture Adjust Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be saved in memory. User 1 Picture Adjust Gamma Fine Menu 1 Contrast Fine Menu 2 Brightness Input Signal Color RGB/HD Adjust Tint HDMI...

  • Page 34: Fine Menu 1

    A projector is forced into the intra-field only deinterlacing mode. Off : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).

  • Page 35: Input Signal

    Input Signal Standard 1 Picture Adjust Component 1 Auto Fine Menu 1 Component 2 Auto Fine Menu 2 S-Video Auto Input Signal Video Auto RGB/HD Adjust Auto HDMI HDMI1 Auto Display HDMI2 Auto OSD/Blanking Config. Item Adjustments Component1, Auto, 480i/576i, 480p, 540p, 576p, Component2 720p, 1035i, 1080i, 1080p S-Video...

  • Page 36: Hdmi

    Rear: Select to set the projector on a tabletop and project from behind the screen. F + Ceiling: Select to mount the projector on the ceiling and project from in front of the screen. R + Ceiling: Select to mount the projector on the ceiling and project from behind the screen.

  • Page 37: Osd/Blanking

    OSD position is selected from 9 positions. – Status Info. Enable: Displays the current status of the projector for a set amount of time in the upper right-hand corner of the screen at startup and whenever the Input Source, Picture Mode, Aspect ratio or other setting is changed.

  • Page 38: Configration

    Set to use the included remote controller. Wired: Set to control the projector from either Marantz’s AV components connected to the REMOTE CONTROL IN/OUT terminals or a PC or other device connected to the RS- 232C terminal of the projector. The included remote controller cannot be used in this case.

  • Page 39: Maintenance

    • Do not loosen any screws except for those mentioned below. • The lamp may break if handled improperly. • Do not use other than a Marantz replacement lamp unit. ❖ How to replace the Lamp Unit PREPARATION: When replacing the lamp, turn off the power for the projector.
  • Page 40 Cover sheet Install the lamp cover back in its original position and fasten with the fastening screw. Plug in the video projector and turn on the power and project the image. • If the lamp is replaced before reaching its 2000 hours lamp life, see “Reset Lamp Life”...

  • Page 41: Cleaning The Lens

    It may damage the lens and remain as stains. Replacement Parts When replacement parts are required, be sure to inform a Marantz authorized service center. Use only replacement parts specified by Marantz. Unauthorized substitutions may result in fire, Ceiling Mount kit : MOUNT 20 electric shock, or other hazards.

  • Page 42: Troubleshooting

    Notes: • If the lamp still does not function after the replacement and initialization of the lamp life, contact a Marantz authorized dealer, or service center. • This projector uses a microcomputer. External noise can cause malfunctions. In such case, shut power OFF and unplug the power cable from AC power outlet.

  • Page 43: Error Mode

    ERROR MODE WARNING/LAMP indicator, ON indicator, and STANDBY indicator diagnose error mode of the projector as follows. Indicators Error mode WARNING /LAMP Lamp cover Lamp Temperature Flashing Flashing Other Flashing ON SCREEN MESSAGE Use the list below to check the message displayed on the screen.

  • Page 44: Specifications

    (1920 x 1080 pixels) Lamp Super High Pressure 200W DC Power consumption Lens VP-15S1: f: 30.7 to 44.5mm Standby consumption For USA: < 0.3 W (AC 120V) VP-15S1L: f: 44.5 to 66.75mm Projection size 70 to 250 inches Chassis isolation Safety ❖...

  • Page 45: Dimensions

    DIMENSIONS VP-15S1 ❖ ❖ Bottom 3/16 12/16 ( 82.6) (182.5) (222.0) ❖ ❖ Front Rear (171.0) 12/16 VP-15S1L ❖ 5/16 (145.75) (185.25) 11/16 11/16 (93.5) (110.0) 3/16 12/16 (182.5) (19.75) ❖ Front 1/16 (105.0) (153.5) ❖ Bottom (145.75) (185.25) 11/16 11/16 (93.5)
  • Page 46 Note...
  • Page 47 You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in Japan 07/2007 00M29AV851250 mzh-g...

This manual is also suitable for:

Vp 15s1/l

Table of Contents