4.
ADJUSTMENT
This chapter explains adjustment necessary when a part is replaced.
This adjustment is made by changing the parameter values set in EEPROM on the main control
board. The status monitor or maintenance utility can be used to change these values.
Only servicemen and maintenance personnel can use the maintenance utility. This utility cannot
be made public for printer end users.
4.1
Adjustment Types and Functions
4.1.1
Status Monitor
(For Microsoft Windows)
This status monitor has the following functions:
•
Drum counter reset
•
Charge roller cleaning
(1) Drum counter reset
This function resets the life of the drum counter when the EP unit is replaced. Clicking the
"Reset" button resets the life.
(2) Cleaning Page Function
This function cleans the charge roller of the EP unit; it is used when printing is unclear. For
details on how to operate this function, refer to "5.2.2".
41154001TH Rev.2
Figure 4-1
74 /