Oki OKIPAGE 10e Maintenance Manual page 131
Led page printer
Hide thumbs
Also See for OKIPAGE 10e:
- Service manual (266 pages) ,
- User manual (46 pages) ,
- Setup manual (20 pages)
Table of Contents
Advertisement
1.2 Engine Menu Setting Group
This area shows the engine menu, the settings of which can be changed.
The details of each item are as follows.
<Print Position>
Shown message
Setting item
Setting range
F/W default
<LED Head Drive Time>
Shown message
Setting item
Setting range
F/W default
<HEAD TYPE>
Shown message
Setting item
Setting range
F/W default
*
Setting of HEAD TYPE is enable only when Optical Head is set at D600-4W.
<Optical Head>
Shown message
Setting item
Setting range
F/W default
*
Selection "D300-2W" and "D600-4W" in setting range is not supported in OKIPAGE 10e.
<Page Count Print>
Shown message
Setting item
Setting range
F/W default
<Setting>
Shown message
Setting item
Setting range
F/W default
41154001TH Rev.2
Print Position
Corrects the start position of print.
-4.00mm~ +3.5mm
0.00mm
LED Head Marking No.
Adjusts the light exposing time of LED Head.
600DPI:
155-020 (No.1~ No.32)
300DPI:
No.1~No.32
212-228 (300dpi-No.17)
Head Type
Sets the correction method in correction head at 600DPI.
TYPE1/ TYPE2D2/ TYPE2D4
TYPE2D4
Optical Head
Sets
D300-1W/ D300-2W/ D600-4W
D300-1W
Page PRT
Selects enable/disable of Page Count print in menu printing.
DISABLE/ ENABLE
DISABLE
Setting
Adjusts the current transmission value.
-2/ -1/ 0/ +1/+2
0
131 /
Advertisement
Table of Contents
Troubleshooting
