Table of Contents
Advertisement
STEP 5
I.
Secure plastic cover (20L+R)
and Computer Rack (7L+R) onto
swing bar and handlebar post with
screws (6) separately.
II.
Remove the 4 Flathead
screws (16) from the back of the com-
puter (1). Connect the upper computer
cable (28) and the computer (1). Con-
nect the 2 Hand Pulse cables (4) and
the computer (1). Sit the computer (1)
onto its bracket and secure in place us-
ing the 4 screws previously removed.
Now, your machine is ready for use.
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been
exposed to cold temperatures, allow it to
warm to room temperature before plugging
in the power adapter. If you do not do this,
you may damage the console displays or
other electronic components.
Plug the power adapter into the receptacle on
the frame of the elliptical.
Next, plug the power adapter into the plug
adapter. Then, plug the plug adapter into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
16
8
7F
Power
Adaptor
8
1
3
4
8
7R
13
17
22
Advertisement
Table of Contents
