How To Plug The Power; Adapter - Pro-Form PFIVEL63212.0 User Manual

Table of Contents

STEP 5

Fix Handlebar (5L/R) to the Swing tubes (4L/R) with

Bolts (16), Arc washers (12) and Acorn nuts (13).

Connect the Extension wire (30) well with the wire of

Computer (10).Then fix the computer (10) on the han-

dlebar post (2) with Screws (33) and flat washer(32).

Finally insert the Pulse sensor wire (36) into the hole

bottom of computer (10)

Now your machine is ready for use.

HOW TO PLUG THE POWER ADAPTER

IMPORTANT: If the exercise elliptical has been exposed to cold temperatures, allow it to warm to room

temperature before plugging in the power adapter. If you do not do this, you may damage the console

displays or other electronic components.

Plug the power adapter into the receptacle on the frame of the

exercise elliptical.

Next, plug the power adapter into the plug adapter.

Then, plug the plug adapter into an appropriate outlet that

is properly installed in accordance with all local codes and

ordinances.

IMPORTANT: The adapter is only needed for the UK market. It

is useless for the other markets.

Power

Table of Contents