Footswitch Polarity Settings; Options; Overall Settings For The Entire Handsonic - Roland HandSonic HPD-20 Owner's Manual

FOOT SWITCH CONTROL–POLARITY
MENU g SYS g FootSw Control g POLARITY
Parameter Explanation
Footswitch polarity settings
Here you can set the polarity of footswitches 1 and 2.
If the function operates when you take your foot off the footswitch, change this setting.
* If only one footswitch is connected, set "Foot Switch 1. "
NORMAL
Foot Switch 1,
Foot Switch 2
INVERSE

Options

OPTIONS
MENU g SYS g Options
Parameter Explanation
Overall settings for the entire HandSonic
Here you can make settings such as display brightness and auto-off.
Adjust the contrast of the display.
The default value is "5. "
Display Contrast
* In the kit screen, you can adjust this by holding down the [KIT] button and press the [-][+] buttons.
Adjust the brightness of the display.
Display Brightness
The default value is "8. "
Illumination
If this is "ON, " the [-][+] buttons will be lit.
–/+ Buttons The default value is "ON. "
If this is "ON, " striking a pad will select it for editing.
Pad Chase If this is "OFF, " hold down the [SHIFT] button and use the [ ] [ ] buttons to select a pad for editing.
The default value is "ON. "
When shipped from the factory, the HandSonic is set to automatically power-off when 4 hours have elapsed since it
was last played or operated.
* Approximately five minutes before the power turns off, a message will appear in the screen.
Auto Off
OFF
4 HOURS
When the HandSonic is connected to a computer via USB, this parameter adjusts the volume of the sound from the
computer that is heard through the HandSonic.
USB Audio Volume
The default value is "80. "
For details, refer to p. 44.
Adjusts the output level of the OUTPUT jacks, PHONES jack, and USB audio.
System Gain Positive ("+") settings increase the output level.
The default value is "0dB. "
By turning this "ON, " you can disable the value knob.
Value Knob Lock
Even if the value knob is disabled, you can use the [-][+] buttons to edit a value.
If this is "ON, " the current settings will be preserved, and any changes made subsequently will all be discarded when
you turn off the power.
Write Protect
Also, it will no longer be possible to import or delete user instruments, or to execute a Factory Reset.
The default value is "OFF. "
Normal setting.
Inverted polarity.
The power will not turn off automatically.
The power will turn off automatically when 4 hours have elapsed.
SYS
65