Audio Delay - Yamaha AVENTAGE RX-A3050 Owner's Manual

3
Use the cursor keys to select "OK" and press ENTER.
• To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
■
Zone2 Set, Zone3 Set
Configures the Zone2 or Zone3 settings.
Volume
Enables/disables volume adjustments for Zone2 or Zone3 output.
If you have connected an external amplifier with volume control to the unit, disable
the volume adjustment for the corresponding zone.
Settings
Fixed Disables volume adjustments for Zone2 or Zone3 output.
Variable Enables volume adjustments for Zone2 or Zone3 output.
• This setting is not available depending on the "Power Amp Assign" setting (p.133).
Max Volume
Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
• This setting is available only when "Volume" is set to "Variable".
Initial Volume
Sets the Zone2 or Zone3 initial volume for when the unit is turned on.
Settings
Sets the level at the volume level of the unit when it last entered standby
Off
mode.
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB
On increments).
(Specify a volume level which is lower than the "Max Volume" setting.)
• This setting is available only when "Volume" is set to "Variable".

Audio Delay

Adjusts the audio output timing for Zone2 or Zone3 so that the audio is
synchronized with the video.
Setting range
0 ms to 100 ms (1 ms increments)
Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
Off Produces stereo sounds in Zone2 or Zone3.
On Produces monaural sounds in Zone2 or Zone3.
Zone Rename
Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV
screen.
You can change the zone name in the same manner as "Zone Rename" in "Main
Zone Set" (p.147).
148
En