Speaker (Manual Setup); Setting Data Copy - Yamaha AVENTAGE RX-A3050 Owner's Manual

Speaker (Manual Setup)

Configures the speaker settings manually.
• Default settings are underlined.
■
Setting Pattern
Registers two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in
the selected pattern.
• Measurement results (Auto Setup)
• Power Amp Assign
• Configuration
• Distance
• Level
• Parametric EQ
Settings
Pattern1, Pattern2
• The setting pattern currently selected is shown at the top of the "Manual Setup" screen.
• This function is useful when you want to save certain settings according to the varying conditions of your
listening environment. For example, if you want to switch the settings when curtains are open or closed,
you can save the settings suited for each condition and switch between them.
■

Setting Data Copy

Copies the "Setting Pattern" parameters in the specified direction.
Choices
Pattern1 > 2 Copies the "Pattern1" parameters to "Pattern2".
Pattern2 > 1 Copies the "Pattern2" parameters to "Pattern1".
■
Power Amp Assign
Selects a speaker system.
The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to
2 subwoofers (with built-in amplifier) to create the favorite acoustic space in your room.
You can also apply bi-amp connections, channel expansion (using an external power
amplifier) or multi-zone configurations to enhance your system.
Settings
Select this option when you use the basic speaker configuration (up to
Basic
9-channel plus rear presence speakers) (p.20).
Select this when you use 7-channel speakers in the main zone and
Zone2 (or Zone3) speakers (p.34).
7ch +1ZONE
You can select a zone to be assigned to the EXTRA SP 1 jacks (default:
Zone2).
Select this when you use 9-channel speakers in the main zone and
Zone3 (or Zone2) speakers (p.34).
9ch +1ZONE
You can select a zone to be assigned to the EXTRA SP 2 jacks (default:
Zone3).
Select this when you use 7-channel speakers in the main zone, plus
Zone2 and Zone3 speakers (p.35).
7ch +2ZONE
You can select a zone to be assigned to the EXTRA SP 1 jacks (default:
Zone2) and EXTRA SP 2 jacks (default: Zone3).
(RX-A3050 only)
9ch +RP Select this when you use 9-channel speakers plus rear presence
channel expansion using an external amplifier (p.31).
(RX-A3050 only)
9ch +FRONT Select this when you use 9-channel speakers plus front channel
expansion using an external amplifier (p.32).
(RX-A3050 only)
7ch +FP+RP Select this when you use 7-channel speakers, plus front presence and
rear presence channel expansion using an external amplifier (p.32).
133
En