Audio Delay; Zone4 Set; Monitor Out Assign - Yamaha RX-A3060 Owner's Manual

Audio Delay

Adjusts the audio output timing for Zone2 or Zone3 so that the audio is synchronized with the
video.
Setting range
0 ms to 100 ms (1 ms increments)
Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
Off Produces stereo sounds in Zone2 or Zone3.
On Produces monaural sounds in Zone2 or Zone3.
Enhancer
Enables/disables Compressed Music Enhancer (p.82) for Zone2 or Zone3 output.
Settings
Off Disables Compressed Music Enhancer.
On Enables Compressed Music Enhancer.
Tone Control
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2 or
Zone3 output.
X
You can also adjust the "Treble" and "Bass" settings for Zone2 or Zone3 output with the front panel controls
(p.109).
Settings
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
Auto
automatically.
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
Manual
manually (-6.0 to +6.0 dB, 0.5 dB increments).
Does not adjust the level of high-frequency range (Treble) and low-frequency
Bypass
range (Bass).
Extra Bass
Enables/disables Extra Bass for Zone2 or Zone3 output. When Extra Bass is enabled, you can
enjoy enhanced bass sounds, regardless of the size of speakers.
Settings
Off Disables Extra Bass.
On Enables Extra Bass.
Zone Rename
Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen.
You can change the zone name in the same manner as "Zone Rename" in "Main Zone Set"
(p.145).
⬛

Zone4 Set

Configures the Zone4 settings.
Zone Rename
Changes the zone name (for Zone4) displayed on the front display or TV screen.
You can change the zone name in the same manner as "Zone Rename" in "Main Zone Set"
(p.145).
⬛

Monitor Out Assign

Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO and VIDEO) jacks
are used.
Settings
Main, Zone2, Zone3
Y
To watch videos played back on a video device on the zone video monitor, you need to connect the video monitor
to the unit in the same way as the video device. For example, if you want to watch videos input from the DVD
player via a component video cable, connect the video monitor to the COMPONENT VIDEO jacks with a
component video cable.
146
En