Rear Panel - Yamaha AVENTAGE RX-A3050 Owner's Manual

Rear panel

PHONO jacks
1
For connecting to a turntable (p.44).
AUDIO 1–3 jacks
2
For connecting to audio playback devices and inputting
audio signals (p.44).
AV 1–4 jacks
3
For connecting to video/audio playback devices and
inputting video/audio signals (p.42).
HDMI OUT 1 jack
4
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.39). When using ARC, TV audio signal
can also be input through the HDMI OUT 1 jack.
HDMI OUT 2 (ZONE OUT) jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.41), or for connecting to an
HDMI-compatible device used in Zone2 or Zone4 (p.106).
1 2 3 4 5
HDMI OUT
(HDCP2.2)
AV 1 AV 2
2 1
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4
(1 BD/DVD) MONITOR OUT/ Y
ZONE OUT
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
A
Y AV 1
ZONE OUT/PRE OUT
L
R
ZONE 2/ ZONE 3/
FRONT
GND 1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL F. PRESENCE R. PRESENCE
SURROUND
R L
ANTENNA
(4 RADIO)
FM AM
75Ω
MONITOR OUT/ZONE OUT
5
(component/composite video) jacks
For connecting to a TV that supports component or
composite video and outputting video signals (p.40) or for
connecting to a zone video monitor used in Zone2 or Zone3
(p.105).
HDMI (AV 1–7) jacks
6
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.42).
COMPONENT VIDEO (AV 1–3) jacks
7
For connecting to video playback devices that support
component video and inputting video signals (p.43).
TRIGGER OUT 1–2 jacks
8
For connecting to devices that support the trigger function
(p.48).
6 7 8 9 @
HDMI (HDCP2.2) NETWORK WIRELESS
( 3 NET )
AV 3 AV 4 AV 5 AV 6 AV 7
COMPONENT VIDEO TRIGGER
P P Y AV 2 P P OUT
B R B R
B
1
REMOTE RS-232C
12V 0.1A
IN OUT
MAX. TOTAL
2
C
P P Y AV 3 P P
B R B R
PRE OUT (SINGLE) (FRONT)
1
2
(REAR)
SURROUND SUR. BACK CENTER
SUBWOOFER
SPEAKERS
SURROUND BACK ZONE 2/ZONE 3/R.PRESENCE CENTER FRONT
R L R
R L
EXTRA SP2
SINGLE
15
En
A B C D
(RX-A3050 U.S.A. model)
AC IN
ZONE 2/ZONE 3/F. PRESENCE/BI-AMP
L
EXTRA SP1
R L
* The area around the video/audio output
jacks is marked in white on the actual
product to prevent improper connections.
REMOTE IN/OUT jacks
9
For connecting to an infrared signal receiver/emitter that
allows you to operate the unit and other devices from another
room (p.107).
NETWORK jack
0
For connecting to a network with a network cable (p.47).
Wireless antenna
A
For connecting to a network device wirelessly (p.63).
RS-232C terminal
B
This is a control expansion terminal for custom installation.
Consult your dealer for details.
VOLTAGE SELECTOR
C
(General model only)
Selects the switch position according to your local voltage
(p.48).
AC IN jack
D
For connecting the supplied power cable (p.48).