Network; Wired; Wireless (Wi-Fi); Wireless Direct - Yamaha AVENTAGE RX-A3050 Owner's Manual

HDMI OUT1, HDMI OUT2
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or
HDMI OUT 2 jack.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
• The HDMI OUT 1–2 jacks output 2-channel audio signals when the unit is turned on.
■
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to "On" or "Auto", you can use the input
selection keys (AV 1–7 and V-AUX) to select an HDMI input even when the unit is in
standby mode (the standby indicator on the unit blinks).
Settings
(This setting is available only when "HDMI Control" is set to "Off".)
Off
Does not output videos/audio to the TV.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
Outputs videos/audio to the TV. If no signals are detected, the unit is
Auto
set to the power saving mode.

Network

Configures the network settings.
■
Network Connection
Selects the network connection method.
Settings
Select this option when you want to connect the unit to a network with a

Wired

commercially-available network cable (p.47).
Select this option when you want to connect the unit to a network via

Wireless (Wi-Fi)

the wireless router (access point). For details on settings, see
"Connecting the unit to a wireless network" (p.64).
Select this option when you want to connect a mobile device to the unit

Wireless Direct

directly. For details on settings, see "Connecting a mobile device to the
unit directly (Wireless Direct)" (p.70).
144
En