Connecting Other Devices; Connecting A Device Compatible With The Trigger Function; Connecting The Power Cable - Yamaha AVENTAGE RX-A3050 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
6

Connecting other devices

Connecting a device compatible with the trigger function

The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to one of the TRIGGER OUT jacks
with a monaural mini-plug cable.
TRIGGER OUT
1–2 jacks
The unit (rear)
TRIGGER
OUT
DMI (HDCP2.2) NETWORK WIRELESS
( 3 NET )
AV 4 AV 5 AV 6 AV 7 1
12V 0.1A
COMPONENT VIDEO TRIGGER
P Y AV 2 P P OUT
R B R MAX. TOTAL
B
1
REMOTE RS-232C
12V 0.1A
IN OUT 2
MAX. TOTAL
2
C
P Y AV 3 P P
R B R
(SINGLE) (FRONT)
1
2
(REAR)
SUR. BACK SUBWOOFER CENTER
SPEAKERS
SURROUND BACK ZONE 2/ZONE 3/R.PRESENCE CENTER FRONT
L R L
R L
EXTRA SP2
SINGLE
• You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.151) in the
"Setup" menu.
Trigger In
Power amplifier
(+12V)
(such as MX-A5000)
System
connector
Yamaha
jack
subwoofer
En
7

Connecting the power cable

Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
NETWORK WIRELESS
( 3 NET )
AV 7
AC IN
GGER
OUT
REMOTE RS-232C
VOLTAGE SELECTOR
.1A
IN OUT
TAL
220V-
240V
110V-
120V
ERS
R.PRESENCE CENTER FRONT ZONE 2/ZONE 3/F. PRESENCE/BI-AMP
R L
L
SP2 EXTRA SP1
R L
After all the connections are complete, connect the supplied power cable to the unit
and then to an AC wall outlet.
The unit (rear)
NETWORK WIRELESS
( 3 NET )
AC IN
OTE RS-232C
OUT
CENTER FRONT ZONE 2/ZONE 3/F. PRESENCE/BI-AMP
R L
EXTRA SP1
R L
48
The unit (rear)
VOLTAGE SELECTOR
To an AC wall outlet