Connecting The Network Cable; Preparing A Wireless Antenna; Connecting Power Cord; Turning On The Unit - Yamaha R-N303 D Owner's Manual

Connecting the network cable

Connect the unit to your router with a commercially-
available STP network cable (CAT-5 or higher straight
cable).
Note
Use STP (Shielded Twisted Pair) cable to prevent
electromagnetic interference.
Internet
WAN
LAN
Modem
Router
Mobile device
(such as iPhone)
SERVICE
NETWORK
This unit (rear)

Preparing a wireless antenna

If you connect the unit wirelessly, erect the wireless
antenna. For information on how to connect the unit to a
wireless network, see "Connecting to network" (p. 14).
For more information on using this unit with a Bluetooth
device, see "Playing back music via Bluetooth" (p. 30).
Notice
Do not apply excessive force on the wireless antenna. Doing so
may damage the antenna.
Network Attached
Storage
(NAS)
PC
Network cable
ANTENNA
FM
AM
75
(R-N303)

Connecting power cord

Plug the power cord into an AC wall outlet after all other
connections are complete.
WARNING
Only for General model:
Before connecting the power cord, make sure you set
VOLTAGE SELECTOR of this unit according to your
local voltage. Improper setting of VOLTAGE SELECTOR
may cause fire and damage to this unit.
MAINS
VOLTAGE SELECTOR
0 20 220 240 V
VOLTAGE SELECTOR
0 20 220 240 V

Turning on the unit

Press A (power) to turn on the unit.
DIMMER
A
OPTICAL
LINE 1
TUNER
BAND
MEMORY
CLEAR
Connections
To the AC wall outlet
with the power cord
SLEEP
A (power)
B
SPEAKERS
COAXIAL CD
LINE 2 PHONO
NET BLUETOOTH
TUNING
PRESET
MODE DISPLAY
13
En