Updating Firmware Via The Network - Yamaha R-N602 Service Manual

■ UPDATING FIRMWARE VIA THE NETWORK

New firmware that provides additional features or product improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware via the network and update it.
Notes
• Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20
minutes or more (depending on your Internet connection speed).
• If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on
the condition of the wireless connection. In this case, update the firmware using the USB memory device.
You can also update the firmware using the USB memory device
from the "ADVANCED SETUP" menu.
Cursor keys
/
ENTER
SETUP
1
Press SETUP.
2
Use the cursor keys (
"Network" and press ENTER.
3
Use the cursor keys (
"Information" and press ENTER.
If new firmware is available, "NewFwAvailable"
appears on the front display.
N E W F W
A v a i l a b l e
4
Press RETURN to return the previous state.
5
Use the cursor keys (
"Update" and press ENTER.
U P D A T E
P e r f o r m U p d a t e
6
To start the firmware update, press ENTER.
The unit to restart and the firmware update starts.
To cancel the operation without updating the firmware, press
SETUP.
7
The firmware update is complete.
RETURN
/ ) to select
/ ) to select
/ ) to select
If "UPDATE SUCCESS" appears on the front
display, press (power) on the front panel.
R-N602
107