Attaching Elastic - ELNA eXcellence 680 Instruction Manual

r
r
→
q
e
r
e
q w
←
q
w
Changing the needle drop position
Press the stitch width adjusting key.
The LCD screen shows the distance between the left
needle position and the guide in millimeters r.
Press the " " sign to move the needle to the right.
Press the " " sign to move the needle to the left.
q Left needle drop position
w Right needle drop position
e Guide on foot
r Distance between the left needle position and the
guide
NOTE:
The stitch width of patterns 18 (mode 1) and 19 (mode
1) cannot be changed, but the needle drop position
will move.
Making the straight stitches in pattern number 19
longer
Program a combination of patterns 18 (mode 1) and
pattern 40 (mode 2).
Two straight stitches will be added to the blind hem stitch
when combining with pattern 40 (mode 2) q (Refer to
page 78).

Attaching Elastic

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Mark the elastic into quarters. Match those to the center
front, center back and side seams, and pin the elastic to
the fabric.
Place the elastic under the foot and stitch into place while
stretch the elastic evenly.
44
MODE 1: 20
AUTO
Satin stitch foot F
5