q
e
r
q
q
q
q
e
r
q
Round End and Fine Fabric Buttonholes
w
Machine settings
The sewing procedure is the same as the square
buttonhole (refer to pages 47-49).
The machine will sew a buttonhole in the order shown.
q Starting point
Keyhole Buttonholes
w
The sewing procedure is the same as the square
buttonhole (refer to pages 47-49).
The machine will sew a buttonhole in the order shown.
Use an eyelet puncher to open a keyhole buttonhole.
q Starting point
w Eyelet puncher
w
Stretch Buttonholes
w
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
The sewing procedure is the same as the square
buttonhole (refer to pages 47-49).
The machine will sew a buttonhole in the order shown.
q Starting point
52
5
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.2 to 1.0.
5
NOTE:
The buttonhole 27 is used for thick buttons on medium
weight fabrics.
The buttonhole 28 is used with thick buttons and
heavy fabrics.
NOTE:
The buttonhole width can be adjusted from 5.6 to 9.0.
The stitch density can be adjusted from 0.2 to 1.0.
MODE 1: 29-31
AUTO
Automatic buttonhole foot R
5
NOTE:
The buttonhole width can be adjusted from 2.6 to 9.0.
The stitch density can be adjusted from 0.5 to 1.0 for
pattern 29 (mode 1), 0.7 to 1.2 for pattern 30 (mode
1) and 0.5 to 2.5 for pattern 31 (mode 1). If the stitch
balance of the left and right row is not even, correct it
by turning the feed balancing dial (refer to page 86).