How To Drop The Feed Dog; Attaching And Removing The Shank - ELNA 6003 Instruction Book

How to Drop the Feed Dog
The feed dog drops out of position for special sewing
techniques: free motion embroidery, button sewing, etc.
@ Lowered position
@ Raised position
Additional Presser Foot Clearance
You can raise the presser foot about 6.5 mm (1/4") higher
than the normal up position for easy removal of the presser
foot or to help you place heavy fabrics under the presser
foot. Pull up the presser foot lever beyond the normal up
position.
@ Presser foot lever
Attaching and Removing Presser Feet
@ Red button
@ Groove
@ Pin
Attaching and Removing the Shank
@ Thumbscrew
When attaching, match the hole in the shank with the hole
in the presser bar. Put thumbscrew into hole. Tighten
thumbscrew by turning it clockwise.
@ Shank
@ Presser bar