Table of Contents
Advertisement
Setting up the PPD driver (Mac OS X)
Note
If the paper size is any size other than the custom size, select the desired
settings after specifying the settings in Custom Paper Size.
When "W" is selected for each standard paper size in the printer driver,
the data can be centered and printed.
For example, if A4 size data is created and you want to center and print
on A3 size paper, specify "A4 W" as the paper size in the printer driver
and specify "Tray 1" or "Bypass Tray" as the paper source.
To print, load A3 size paper in the tray ("Tray 1" or "Bypass Tray") of this
machine that is specified in the printer driver, and then specify the set-
tings described below from [Basic Screen (Paper)] — [Change Tray Set-
tings] — [Oversized Paper] on the control panel.
Select "A4W".
Enter the A3 paper size (420.0 × 297.0) in [Change Size].
CS175
9
9-7
Advertisement
Table of Contents
