Table of Contents
Advertisement
5
5
Select the installed options from the drop-down lists in the Option dia-
log box.
Note
To automatically set the installed options, enter the printer name or IP ad-
dress of this machine in the "Printer Name or IP Address" box under "Op-
tion Information", and then click the [Gather Option Information] button.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select "Bin Setting"
from "Administrator Setting" - "System Setting" - "Output Setting" on the
control panel.
If "Printer" is displayed when specifying the output destination in the
printer driver, the mail bin that is selected is shown in the figure.
5-48
Setting up the PCL driver
CS175
Advertisement
Table of Contents
