Table of Contents
Advertisement
st
1
Boot Devices
Specify the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in corresponding type menu.
Boot Up NumLock Status
The default value is On.
On (default) Keypad is numeric keys.
Off
MPS Version
This option is only valid for multiprocessor motherboards as it specifies the version of
The Multiprocessor Specification (MPS) that the motherboard will use.
3-5-1 CPU Feature
C1E Function
This should be enabled in order to enable or disable the "Enhanced Halt State". The
optional settings are: Enabled; Disabled.
Keypad is arrow keys.
22
Advertisement
Table of Contents
